Видео

Yeah that's why people searched this.

Where did you order the torsion bar from mine just broke and can't find anywhere on line

El vídeo es tan bueno y maravilloso que tiene mucho significado para los espectadores.

Check your valve covers for forklift fork damage! My JDM 2.0 had a broken valve cover too. My dealer was local, so they gave me another one.

How much horsepower?

Quantas polegadas é esta serra?

Great! - I just did the same swap, however, the car is running too rich.. did you have the same issue? if so, how did you fix it?

Why not cut it while pulling? Just curious. Love how you did it, have a similar situation and trying to figure the best way. This looks best so far.

Nice job sir! Thanks for the video!

hithere well i am a bit late but good sawing and nice mill . best to all john

Very nice, nice to meet you from Indonesian

The old jimmy needed a little diesel crack to get her moaning

I learn from how you not hit the fittings, by using the fork, or by carefully hitting flat top of screw.

Just did everything you did, controller is not lighting up when turning on the truck? I have trailer brake module fault showing but the controller did not light up? can you help me?

Your right and another thing is proper torque.

Thanks for sharing this video. I am going to try soon. Last weekend I put a D17A in my Civic. My first engine swap was a success. How long did your EJ20 last for?

Besar sekali kayu tumbang nya😮

The sawmills here in Oklahoma operate far faster with far less indecision.

4/10 for not much info on the specifics of the repair. 10/10 for cute doggo

Is this an all day job just to be ready to cut

Great video, very valuable information

I just discovered a similar situation with my engine, FA20, both rear exhaust manifold studs are slightly tilting to the back of the car. The Exhaust manifold gets hung up and cannot be removed easily. Im sure there is a way but I have to find it. Until then I cannot replace the gasket between the exhaust manifold and the turbo inlet which is leaking. On top of the that I also discovered the dealership forgot to put back several things like rubber gaskets, bolts and one of the nuts on the exhaust manifold mount that has been casing a major leak.

Thanks for the great job application and I suggest the camera angles to show how hard to work in such environment Thanks once again for all the beautiful work 🇩🇰👌👍🙏

Good job on the carriage. Beautiful old mill. Thanks for the video.

I’m about to do this swap with my 2007 wrx and I like how you explained everything very well

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

Same mill my dad had

I can imagine buddy was cutting to what on the market is or the I like costum made .grampa knows what he's going.

Harganya berapa

Great Chris, Very nice video. It would be nice to know a precise list of what needs to be swapped over. I get the Crank and cam pulley etc

Awesome my favorite mill FRICK 0😊

Get to loppin' and buckin' boys, the hard part is still ahead!

The older man didnt even move... lolololololol

very good, this powerful wall saw.

Id have cut back side one third. Got in front. Cut down a third from top and cut the front in about 10 inches plunged in at a third way down and cut to the bottom. Came back up and cut down through the holding wood

Great video. Have you ever used a green line laser module as an alignment tool ?

De❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤jeejkwjskwkwo Hsjsusjj1jskjskwjsjjeksjkwisiei2iei2oudtkrugjidrkkcfjrkhiuuii

Did all these steps and still not working! Did i miss something?

Wanna work with you

i cant figure out how you get to the mounting bolts with the way the trail arm is in the way and no matter how i try going thru the little area of the trail arm the extension & or socket is on a lean . the engineer needs a swift kick in the azz

Cool and helpful video! My 2003 looks just like yours and my friend yluded 5m bolts to try and get the plate off, but all 3 broke in the clutch plate. I have no idea hoe im going to get mine off.

Hi thanks for sharing this video instruction, I bought already swapped car (also legacy) but now I have over fuel consumption Need I change engine computer?

Troppo. Rumore.....🥴

Chris, great video! I have been working on this over the past couple of days. I went through it in the reverse order from you. I installed the controller, went into Forscan and enabled the TBC. The controller lights up, allows me to control the Gain, shows "Trailer Disconnected" on the dash, but it showing "Trailer Brake Module Fault". I'm thinking it's because I haven't replaced the master cylinder and it looks like I have to do that as I only have one plug underneath, towards the front, which I believe it for the cruise control. I'm trying to hunt down the proper master cylinder. When I searched the part number you provided in one of your responses, it has the two plugs underneath but mine also has a plug on the side, near the valves. Any idea on how to hunt that down? When I called my local dealership, they only provided me with the master cylinder that came with my truck, which only has the one plug.

Este video me ahorro mucho dinero solo compre la pieza me costo como 42 dlls yo la instale y problema solucionado..mi camioneta solo prendia el tablero pero no encedia. F250. 6.4 2008

hi there nice sawmill john

Loctite releases at 350 degrees F. This can be achieved with a heat shrink gun. Fyi.

Wow! I a surprised on how easily your drag link came off. i am having issues with mine coming off. i have tried a puller and a pickle fork to no avail.

You are setting your camera on the wrong side of the process. All I see is a log moving back and forth. Not so entertaining.

Lovely Nice sawing